| |
Welcome to REDI-STRIP
Redi-Strip is
Australia's largest metal stripping operation.
FOR PAINT STRIPPING,
DERUSTING, CHEMICAL CLEANING, SURFACE TREATMENTS of FERROUS
& NON FERROUS METALS
I In the
REDI-STRIP cleaning
process, we use a unique patented ENVIRONMENTALLY FRIENDLY
alkaline chemical cleaning compound SHS. This is a
completely non-destructive, immersion metal cleaning process
for both FERROUS and NON-FERROUS METALS. This process not
only STRIPS PAINTS, POWDER COATINGS, GREASE and GRIME but
also REMOVES RUST and SCALE while also LOOSENING and
DERUSTING THREADS.
What is unique about the
REDI-STRIP
process is, it WILL NOT ALTER OR REMOVE ANY OF THE PARENT
METAL, and when finished leaves a light anti corrosive film
covering the original material so you
will not get surface
rust on your freshly cleaned equipment. Your equipment will
finish looking as good as new.
This world leading process allows you the confidence to know
that you’re valuable equipment will be handled safely,
efficiently, and completely cleaned and not just what you
can see, but all surfaces INSIDE and OUT
This makes REDI STRIP, Australia’s most cost efficient,
safe, and thorough, industrial cleaning method available
today
Our eco-friendly, advanced, industry leading cleaning system
provides a quantum leap forward from previous industrial
methods. Some cleaning methods can have potentially surface
damaging results. Like panel rippling, etching, or the like.
We use a soft acting, unique method of complete metal based
cleaning. Other methods such as abrasive or media blasting,
acid dipping, soda blasting, wire brushing or labour
intensive hard scraping cannot provide the same outstanding
results that
REDI-STRIP system
provides.
Once our cleaning process is completed your parts look just
like new. For a small extra cost they can be coated with our
special formulated anti-rust coating, which is proven to
give corrosion protection for your newly cleaned parts for
many years.
When ready for use, just a quick wash with a degreaser and
they are good to go.
The
REDI-STRIP system is used
and recommended Australia wide, by industry leaders who
demand excellence.
DO YOUR
VALUABLE ITEMS REQUIRE ANYTHING LESS THAN THE BEST?
Remember excellent
preparation is the key to excellent results
Located centrally at BLACKTOWN,
in SYDNEY’S WESTERN SUBURBS and with close access to the M7,
M2 and M4 we are well placed for easy access
Let us do the dirty work for
you
DON’T DELAY, CALL REDI-STRIP TODAY
|
|
