| |
RUST REMOVAL
The REDI-STRIP rust removal process is sheer
magic. It is called ALKALINE ELECTROLYTIC IMMERSION and it
does away with acid dipping, abrasive blasting, chipping,
scraping and other destructive procedures for de-rusting.
In the REDI-STRIP tanks,
rust "floats" off steel and other
ferrous metals, leaving surfaces bright and clean. The
formulations used are safe for de-rusting parts with
attachments such as rubber, plastic, wood and glass.
REDI-STRIP process is perfect for cleaning components
where avoiding metal fatigue is crucial, because it removes
no metal and cannot cause stress cracks, etching or embrittlement. Yet the process thoroughly derusts every pit,
crevice and cavity, and releases "frozen" threads.
And the rust does not come back. A protective residual film
remains on all surfaces, eliminating the need for expensive
greasing and degreasing. When ready for use, the parts are
simply water-rinsed and dried.
With immersion tanks up to 6 metres (20 feet) long, REDI-STRIP
can derust anything from a pin to a punch press. Machine
tools, hardware, car bodies and sheet metal products are
just part of the wide variety of items derusted by REDI-STRIP
every day.
Caterpillar diesel engine blocks
Before and after derusting.
The white streaks are from the
Protective residual film left by the process. |
 |
| |
|
Why scrape (or scrap) rusted products
Or equipment when Redi-Strip
Can restore them? |
|
| |
|
Note how the
REDI-STRIP derusting process
Has penetrated and cleaned the bores and
Tapped holes, as well as the exteriors of
These machined parts. |
 |
All
things considered, it's a derusting process you can't do
without, can't do yourself, and can't get done anywhere
else.
Be wise... LET Redi-Strip DO IT!
Contact us at REDI-STRIP
16 Bessemer Street Blacktown NSW 2148
For immediate attention please telephone 02 9831 6799
Or by Fax on 02 9831 3836
|
|
